8017 Trotec Speedy
300 fiber
BEFORE OPERATION
28/07/2015
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
18 / 54
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
3.3 Location
Before you install the laser system, you should select an appropriate location. Follow the
guidelines shown below:
Avoid locations where the system is exposed to high temperatures, dust and
high humidity (The humidity must not exceed 70% and the temperature must
not be close to the dew point).
Avoid locations, where the system is exposed to mechanical shocks
Fuse protection:
Do not connect other devices via the laser fuse, as the laser system requires
the full amperage.
Avoid locations with poor air circulation.
Select a location, whose room temperature is between 15 °C and 25 °C (59°
–
77° F). Avoid higher ambient temperatures and strong exposure of the
machine to the sun. Use blinds, if required.
Select a location close to ventilation (if available).
Select a location that is not more than 2.50 m away from your computer
(max. cable length to avoid disturbing interferences).
Try to place a working table or a place to put things next to it. This shall avoid,
that the machine is misused as a table.
