EN
5
radial fan TFV PRO 1
Assembly and installation
Scope of delivery
•
1 x Device
•
1 x Air filter
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
•
Place the device on its feet.
The device can either be set up on the large or on the
small feet.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
Inserting the air filter
Caution
Risk of injury from parts being whirled up!
Before switching the device on, make sure that there
are no loose parts (clothing, hair ...) located near the
air inlet or outlet!
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
