4
EN
radial fan TFV PRO 1
Information about the device
Device description
The radial fan TFV PRO 1 was designed for a high air volume
flow, while being very space-saving.
It may be used for drying carpets, buildings or screed as well as
for the ventilation of poorly accessible intermediate spaces.
The fan speed can be infinitely adjusted.
Using optionally available adapter plates (3, 8 or 12 connectors),
you can fit hoses with various diameters to the device.
Device depiction
1
2
3
4
5
6
9
7
10
8
No.
Designation
1
Fan stage control dial
2
Power button
3
Counter for operating hours and kWh consumption
4
Power cable
5
Power cable holder
6
Air inlet
7
Feet, large – non-marking
8
Feet, small – non-marking
9
Air outlet
10
Transport handle
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with a carry
handle.
Storage
Before
storing the device, proceed as follows:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
After
transporting the device, proceed as follows:
•
Place the device on its feet.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
stackable: up to 5 devices on top of one another
