EN
9
fan heater TFH 19 E
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Allow the device to cool down completely.
Warning of electrical voltage
Tasks which require the device to be opened must
only be carried out by authorised specialist
companies or by Trotec.
Cleaning the housing
Warning of electrical voltage
Never immerse the device in water!
Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Wipe the housing dry after cleaning.
Technical annex
Technical data
Parameter
Value
Model
TFH 19 E
Heating capacity
level 1:
level 2:
level 3:
ventilation only
1000 W
2000 W
Air discharge velocity
2.8 m/s
Operating range
-15 °C to +85 °C
Mains connection
220-240 V, 50/60 Hz
Max. power input
2000 W
Nominal current consumption 8.7 A
Plug type
CEE 7/17
Cable length
1.2 m
Protection class
II /
Protection type
IP X0
Overheating protection
85 °C
Weight
1.0 kg
Dimensions
(length x width x height)
240 x 120 x 255 (mm)
Minimum distance to walls or
other objects
A: top:
B: rear:
C: side:
D: front:
50 cm
50 cm
50 cm
120 cm
