7.Turn on the power at breaker box - your fan is ready for operation.
Pull Chain Knob
Connect Pull Chain Knob provided from hardware bag to the pull chain from switch housing.
6. PULL CHAIN KNOB INSTALLATION
P6
P6
Fan Assembly
2
Fan Assembly
Switch Housing
Switch Housing
Cover
1
Screw & Rubber Washer (3)
Remove 3 set screws &
from switch housing cover and keep them for Step
.
Fasten switch housing and the cover together with 3 set screws &
removed from Step
rubber washers
rubber washers
.
1
2
1
2
Switch Housing
Screw &
Rubber Washer (3)
5.
INSTALLATION
SWITCH HOUSING
4. BLADE INSTALLATION
Attach blade to blade holder with 3 blade screws and 3 rubber washers provided from hardware bag.
Make sure all screws are firmly tightened.
Remove 3 motor stoppers by removing screws.
Secure Blade Assembly to the motor with 2 motor screws provided from hardware bag.
To prevent wobble, do not bend blade or blade holder.
NOTE:
1
2
3
Blade Screw (3)
Blade Holder
Rubber Washer (3)
1
Motor
Stopper (3)
2
Motor screw (2)
3
Blade Assembly
Fan Assembly
Blade
