1. HANGING SYSTEM INSTALLATION
Outlet Box
Mounting
Bracket
1A.Installing mounting bracket to ceiling outlet box
WARNING: blades should be at least 7 feet from floor
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable
for fan support.
Outlet box must support 35 lbs min.
Note 1:
Note 2:
P3
Cross Pin
Cotter Pin
Canopy
Downrod
4
Downrod Jam
Screw(2)
(
ing)
Loosen
Yoke
Downrod
Assembly
Wires
3
Yoke cover
1B. This fan has two installation methods available:
Downrod mount (Standard) : Please follow up Step 1C and 1D.
Flush mount (Hugger) : Please directly go to Step 1E and 1F.
1
2
1C.
Downrod and Yoke
Installing
Remove cross pin and cotter pin from downrod.
Remove the pre-attached Gasket from the downrod assembly and keep for Step
.
Insert downrod through canopy and yoke cover, and feed motor lead wires through downrod.
Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.
8
1
2
3
4
(See Step 1C and 1D)
(See Step 1E and 1F)
1
2
Downrod mount
Flush mount
2
1
Gasket
(Removing)
1
Install mounting bracket to outlet box in ceiling by using screws
included with the outlet box and washers from the hardware bag.
