1
Ravello Crescent Sectional
Assembly Instructions
Congratulations on the purchase of your Tropitone
®
Ravello
Cushion Crescent Sectionals. Read through all steps before
fastening components together.
CAUTION:
Do not try to lift or flip furniture components
with only one person. Components may be heavy and
awkward to handle, and may result in injury to persons or
damage to property if not lifted properly.
Tools Required
3/16” Hex Key
Safety Glasses
Parts List per Sectional Unit
(1) Crescent Sectional (MC,
ML, or MR)
(1) Rear Bracket (Wide)
(1) Front Bracket (Narrow)
(4) ¼-20 x 1” Socket Head
Screws
(4) ¼” Lock Washers
(4) 5/16” Flat Washers
(1) Seat Cushion
(1) Back Cushion
Check that all items listed in the Parts List are in your carton.
Assembled furniture
is heavy. Assemble
at place of use.
2
Step 1
Sectional Units can be assembled in upright position. By reaching
under furniture with cushions removed, the attachment locations
may be accessed.
Step 2
Align Sectional Units to be ready for assembly.
At the front of the Sectional Units that are being joined together,
attach a Front Bracket (Narrow) to join the items using (2) ¼-20 x
1” Socket Head Screws fitted with (1) ¼” Lock Washer each and
(1) 5/16” Flat Washer each through the holes in the bracket into
the threaded holes. Threaded holes are located below the cushion
under sling near the front of the furniture components. Tighten
screws hand tight.
NOTE:
Do not fully tighten Socket Head Screws until
Step 3
.
Front Bracket Location (Narrow) on underside
Rear Bracket Location (Wide) on underside
