1
KOR Modular
and Spanner Table
Assembly Instructions
Congratulations on the purchase of your Tropitone
®
KOR Modular
Components. Read through all steps before fastening components
together.
CAUTION:
Do not try to lift or flip furniture components
with only one person. Components may be heavy and
awkward to handle, and may result in injury to persons or
damage to property if not lifted properly.
Tools Required
7/16” Combination Wrench
Safety Glasses
Parts List per Sectional Unit
(1) Modular Component
(MC, ML, MR, or CC)
(2) Connecting Brackets
(MC, ML, MR, or CC)
(4) ¼ x 7/8” Hex Head Bolts
(MC, ML, MR or CC)
(4) ¼” Lock Washers
(MC, ML, MR, & CC)
(1) Seat Cushion
(1) Back Cushion
Parts List per Spanner Table
(1) Spanner Table
(8) ¼ x 3/4” Hex Head Bolts
(8) ¼” Lock Washers
Check that all items listed in the Parts List are in your carton.
Assembled furniture
is heavy. Assemble
at place of use.
2
Modular Component Assembly
Step 1
Modular Components can be assembled in upright position. By
reaching under furniture with cushions removed, the attachment
locations may be accessed.
Step 2
Align Modular Components to be ready for assembly.
At the front and rear of the Modular Components that are being
joined together, attach a connecting Bracket to join the items
using (1) ¼-20 x 7/8” Hex Head Bolts fitted with (1) ¼” Lock
Washer through the holes in the brackets into the threaded holes
at the front and back of the components. Threaded holes are
located below the cushion under sling near the front of the
furniture components. Tighten bolts hand tight in both locations.
Fully Tighten bolts in both locations using a 7/16” combination
wrench.
Step 3
Repeat Step 2 for each additional Modular Component until all
items are fastened together into the desired configuration.