1
Kenzo Modular
Assembly Instructions
Congratulations on the purchase of your Tropitone
®
Kenzo
Modular Components. Read through all steps before fastening
components together.
CAUTION:
Do not try to lift or flip furniture components
with only one person. Components may be heavy and
awkward to handle, and may result in injury to persons or
damage to property if not lifted properly.
Tools Required
7/16” Combination Wrench
Safety Glasses
Parts List per Sectional Unit
(1) Modular Component
(2) Connecting Brackets
(4) ¼ x 7/8” Hex Head Bolts
(4) ¼” Lock Washers
Check that all items listed in the Parts List are in your carton.
Assembled furniture
is heavy. Assemble
at place of use.
2
Step 1
Modular Components can be assembled in upright position. By
reaching under furniture with cushions removed, the attachment
locations may be accessed.
Step 2
Align Modular Components to be ready for assembly.
At the front and rear of the Modular Components that are being
joined together, attach a connecting Bracket to join the items
using (2) ¼ x 7/8” Hex Head Bolts fitted with (1) ¼” Lock Washer
each through the holes in the brackets into the threaded holes at
the front and back of the components. Threaded holes are located
below the cushion under sling near the front of the furniture
components. Tighten bolts hand tight in both locations.
Fully Tighten bolts in both locations using a 7/16” combination
wrench.
