Installation Guide Qiwi Switches
Document no. 120-10X.44 11/2016 ENG
Seite 6 von 16
2.2.
Interfaces
The Qiwi managed Switch is shown below.
Order no. 006-120-100
Digit
Description
1
V1: power supply 1, V2: power supplyl 2
2
connection of power supply
3
N/A
4
Ethernet Port mit Port-LEDs: LA = Link Activity, SP = Speed
5
ground connection
Order no. 006-120-101
Digit
Description
1
system-LED
2
connection block for power supply, fault contact, digital input
3
USB Port
4
Ethernet Port with port-LED
5
ground connection
3.
Installation
WARNING!
Never perform wiring electrical connections if they are under voltage!
Do not perform any assembly work on the device when it is under voltage
3.1.
Mounting
Perform the following steps to mount the device:
► Make sure that all electrical connectors are volt-free
► Make sure that the device is disconnected from all connections
► To mount the device on a DIN rail please push down the device until it snaps in
1
3
2
4
5
