TRONTEQ Electronic 006-120-100, Руководство по установке

Страница: 10 / 16

Installation Guide Qiwi Switches
Document no. 120-10X.44 11/2016 ENG
Seite 10 von 16
5. LED display
5.1. System LED
Order no. 006-120-100
LED Color Activity Operating state
V1
- off power supply V1 is not connected or too low
green lights up level of power supply V1 is good
V2
- off power supply V2 is not connected or too low
green lights up level of power supply V2 is good
Order no. 006-120-101
LED Color Activity Operating state
PWR
- none Power supply V1/V2 is not connected or too low.
green lights up The device is powered.
green flashes with 30Hz There is a fault with redundant power supply.
MOD
- none The device is not ready to operate.
green lights up The device is ready to operate.
green flashes with 1Hz The USB interface is in device mode.
green flashes with 10Hz
A firmware update is performed.
Loading data from USB flash drive.
ERR
- none There is no fault. System is operating properly.
red flashes with 1Hz The last loaded configuration file was invalid.
red flashes with 10Hz The fault contact is active.
red flashes with 30Hz There is an error with the power supply.
red lights up Internal system fault or over temperature.
DI
- none Digital input is not active.
green lights up Digital input is active.
5.2. Ethernet port LED
LED Color Activity Operating state
LA
- none no network connection, Link-Down
green light up connected to network, Link-Up
green flashes data transfer active
SP
- none speed 10 MBit/s, Link-Up
yellow lights up speed 100 MBit/s