Tronic 388710 2101, Инструкции по эксплуатации и безопасности

Страница: 13 / 73

GB/IE/NI 13
NOTE:
Do not attach a metal object to the Qi charging surface
4
.
Do not charge your device when the Qi charging surface
4
is covered with a towel, layer of dust, etc.
Do not allow the Qi charging surface
4
to get wet from
water, beverages, etc.
Immediately switch the product off and remove the charging
cable from the product if you smell burning or see smoke.
Have the product examined by a qualified technician
before using it again.
Do not subject the Qi charging surface 4 with a strong
forces or impact. Failure to do so may result in damage,
injury and/or malfunction.
Do not place magnetic recording media inside the charging
area during charging. The magnetism generated may erase
the data on credit cards. It may also cause wristwatches
and other precision instruments to malfunction.
During charging and immediately after charging, the Qi
charging surface 4 and mobile device will be warm.
This is normal and not a malfunction. If there is an unusual
heating, check the Qi charging surface 4 and mobile
device.
Always place only one mobile device to charge on the Qi
charging surface
4
.
Compatibility with all Qi devices cannot be guaranteed.
Do not attach an anti-slip mat or stickers to the Qi charging
surface. The presence of an anti-slip mat or stickers between
the mobile device to be charged and the Qi charging
surface 4 that may prevent charging start.
If a cover or decorative accessory that does not comply
with the Qi wireless power standard has been attached to
the supported device, it may not be possible for the device
to be charged depending on the material, thickness, etc. of
the cover or accessory. In such cases, remove the attached
cover or accessory.