Trolex TX8060, Руководство пользователя

Страница: 43 / 49

XD One User Manual
www.trolex.com
P5644.1600 Rev A 42
The XD One has been designed to be as maintenance free as possible. In some circumstances, it is
possible that a routine preventative maintenance schedule should be used to ensure that the
performance of the device is upheld.
The following table should be used as guidance to the level of unit maintenance required based on
environmental dust loadings.
Note: Trolex understands all particulate types are different and therefore this matrix should be used as
a continual maintenance guide only, operational environments may be different. It is recommended
that an assessment of the site environmental and operating conditions is carried out from time to time
to support the required frequency of a routine maintenance schedule.
Required maintenance routines may vary based on specific site conditions, dust type and loading.
It is recommended that the XD One is operated with location and proximity consideration relating to
atomising dust suppression systems. Instrument readings will include atomised or misted sizes that pass
through the XD One sensor, within the particle detection range.
Dust Loading Average Dust Loading
in mg/m3 Expected Maintenance
Schedule
Low
up to 5mg/m3 6-12 Months
Medium
up to 10mg/m3 3-6 Months
High
10mg/m3 or above 1-3 Months