Trojan MARATHON 220, Руководство пользователя, Страница: 15 / 25

15
CONSOLE FUNCTIONS
OPERATING PROCEDURES:
MANUAL MODE:
Use the Mode button to choose P0 (Manual) program and press Clear / Set
to set the countdown parameters. Set the parameters in the sequence
of TIME, DISTANCE, CALORIES. The display will show the parameter that
needs to be set. Use the Fast / Slow keys to select the desired values then
press Mode to confirm the setting and to move to the next parameter.
When finished setting all parameters or during setting the parameters press
Start to start the program. When any parameter is counted down to 0, the
Trojan Marathon 220 Treadmill automatically stops. Press Start if you want
to continue, and the Trojan Marathon 220 Treadmill will start counting up
to the set parameters. Use the Fast / Slow keys to select your Speed and
press the Mode button to switch the display parameters. Press Stop to end
the training program.
QUICK START MODE:
Place the Safety Key into position and press Start to start the unit in the
manual mode with all default values.
BUILT-IN PROGRAM MODE:
There are 12 built-in speed patterns in programs P1 - P12. Each program
has 30 speed segments, each segment lasts 1 minute i.e. 30 minutes total
training time for each program.
ERROR MESSAGE:
E0: Safety Key is not in place and the Trojan Marathon 220 Treadmill is
locked. Insert the Safety Key.
E1: No speed signal is received. This means the front roller pulley (which has
a magnet on it), has a gap of less than 3 mm between the magnet and the
speed sensor. Plaese call the Trojan call centre on 0861 876 526
(0861 TROJAN).