NRX EVoIP 1 - Quick Start Guide
Packing Contents
Inside the NRX EVoIP box you should find:
(1) One NRX EVoIP telephone (Including Handset & Handset Cord)
(2) One AC to DC Power Adaptor (9~12VDC/1A)
(3) One User Manual
(4) One network cable
Please check if the packing is damaged or any component is missing. If so, please contact
your distributor.
Step 1: Installation
1. Connect one end of handset cord to the telephone handset and the other end to the
handset socket located on the underside of the telephone.
NOTE: You will need to remove the wall mount bracket to access this socket.
1. Connect the RJ45 WAN port to a ADSL NAT Router.
2. Connect the RJ45 LAN port to Notebook PC LAN port using a Category 5 LAN cable.
3. Connect DC Power Adaptor. The LCD Panel will start showing 'Loading Program!'
4. The LCD panel will show Date, Time and No service without SIP registration, or
<phone number> after successful SIP registration.
5. Pick up the phone, and the LCD panel will show IP Dialing.. 1. Please hang up.
6. Press
MENU , 4 , 5
from the keypad to check the LAN IP address (default:
192.168.123.1) for NRX EVoiP telephone.
7. The
MENU
key is used for menu/escape, the
UP ,
DOWN and ENTER
keys for
navigating the menu system, phonebook or Call log.
Ist Floor
Amphenol Complex
Thanet Way
Whitstable
Kent
CT5 3JF
ENGLAND
Tel: (+44) (0)1227 275357 Fax: (+44) (0)1227 272932
e-mail: [email protected]
SIP Account Number Selections:
With 3 SIP account registered numbers, the NRX EVoIP telephone may receive all the
incoming calls from the 3 SIP servers. Realm 1, 2, and 3 are used to configure the
registered numbers for the 1st, 2nd, and 3rd SIP servers, respectively. The telephone
may register different phone numbers to different SIP servers.
You can select the different lines by pressing LINE 1, LINE 2 or LINE 3 on the telephone.
Line 1 is used at default. When one or more of the lines are registered the LED indicator
will switch on.
9. The LCD will display the registered <phone number> after successful SIP registration
to the 1st SIP server at default.
Step 4: Making Point-To-Point SIP Calls
1. Select one of the three SIP servers. Pick up the handset or press the
'Speaker/Headset' button, you should hear a dial tone.
2. Press 123456# to call the party with the number 123456 registered in the SIP server.
Note # is used to send out the call immediately. In a moment, you should hear the ring
back tone, and wait for the called party to answer.
Note: If you have difficulties in configuring your NRX EVoIP telephone, please refer to the
full NRX EVoIP User Guide which was supplied on a CD-ROM with you phone.
Warranty:
Trojan Telecom has built the NRX EVoIP telephone to a high standard. Our warranty reflects our belief that during it’s working life you
should not experience any mechanical failures. Trojan Telecom will at all times use a sensible and supportive attitude towards
warrantable returns, working with you in identifying ‘no fault found’. The following terms and conditions apply:
1) Where we find a genuine warranty failure, Trojan Telecom will replace the faulty instrument with a one-for-one replacement.
2) It is the responsibility of the user to return the faulty telephone to Trojan Telecom. We ask you to cover this cost and we will
return your replacement telephone at our expense.
3) We reserve the right to repair the faulty item or replace it with a similar telephone of the same make.
4) Discontinued models under warranty will be replaced with a similar or more featured telephone.
5) We reserve the right to charge for items considered to be chargeable under fair wear and tear.
6) User misuse or any modification carried out to the NRX EVoIP telephone by the customer is not considered a manufacturing
fault or component defect. Therefore it is not covered by the warranty.
7) Accidental damage such as liquid spillage or user damage will not be covered under the terms of the warranty.
8) When returning the telephone please ensure you fully complete the returns authorisation form, failure to do so could cause you
unnecessary delay.
The terms of this warranty do not effect your statutory rights. Warranty applies to UK customers only. Faulty units should be
returned to our service centre at the following address, together with the completed return form on the opposite page.
SERVISCOMM, UNIT 2, RED BARNES WAY, McMullen Road, Darlington, DL1 2RR UK.
1
2
ABC
3
DEF
6
MNO
5
JKL
4
GHI
8
TUV
7
PQRS
9
WXYZ
0
MENU
ENTER
VMAIL
CONF
TRANSFER
HOLD
DEL/MUTE
PHONEBOOK
CALL LOG
FORWARD
L 1
L 2
L 3
M1
M2
DND
Tel No:
EXT:
OK
