TRNDlabs SKEYE, Руководство пользователя, Страница: 11 / 16

11
The drone needs to be calibrated if it flies unstable.
1.
Place the drone on a flat surface and calibrate
throttle (See 4 under “Flying Your Drone”)
2.
Move the direction stick and the throttle/rotate
stick into the lower right corner. Two LED lights
on the drone will flash for 2-4 seconds and turn
into a constant light meaning that the calibration
is successful.
Fit the microSD Card underneath at the rear in the SD
card slot in the drone. Make sure the metal contacts on
the SD card are facing the right direction.
Press the video button to begin video-recording.
Press the button again to stop recording. While
recording, the LED in the SD card slot on the
drone flashes red.
Press the photo button on the controller and
the camera takes a photo. The LED in the
SD card slot on the drone flashes red after
each photo is taken. The small button on the
drone is an alternative photo button.
Calibration
Video & Photo Function
Recording a Video
Taking a Photo