Frequency Range:
20 Hz - 20 kHz
Impedance:
32 Ω
Bluetooth:
V4.0 EDR, CSR, A2DP
Operating Distance:
10 meter
Charging Time:
2 - 3 hours
Play Time:
6 - 8 hours
Standby Time:
150 hours
5
6
7
6
Troubleshooting
No power:
Ensure your Franklin is
charged and has enough power for use.
Please note that your Franklin works while
charging as well.
No sound:
Ensure your Franklin is on.
Ensure your Bluetooth device is on. If the
volume of the Franklin is too low, adjust
the volume to an appropriate level.
Unable to connect:
Turn off your Franklin
and turn it back on. Your Franklin will
go into pairing mode. Select ‘Franklin’
from the list on your Bluetooth device to
reconnect.
Poor sound quality:
Ensure placing your
Franklin and your Bluetooth device in a
range of 3.3ft (10 meter) sensing distance.
Accordingly, be sure to check that there
are no barriers that would block the signal.
• Do not expose your Franklin to extremely high or low temperatures.
• Do not leave your Franklin in direct sunlight for extended periods of time.
• Do not leave your Franklin near open flames such as cooking burners, candles, or fireplaces.
• Do not block any openings which serve as a ventilation function.
• Do not dispose your Franklin to fire. The battery could explode causing fatal injuries.
• Charge the battery exclusively in accordance with the user manual instructions provided with
your Franklin product package.
• not attempt to disassemble the Franklin’s charger or force open the built-in battery because
this may result in an electric shock.
• Do not clean your Franklin while it is being charged. Always unplug the charger first before
cleaning your Franklin.
• Do not store your Franklin or any of its accessories near or over your automobile’s airbag
because serious injury may result in case of airbags deployment.
This product (including any accessories included in the original packaging) as supplied and
distributed in new condition, is warranted by TRNDlabs to the original consumer purchaser,
against defects in material and workmanship (“Warranty”) as can be found on
www.trndlabs.com
.
Warranty
•
Exposure to high volume sound levels and
excessive sound pressure may cause tempo-
rary or permanent damage to your hearing.
Although there is no single volume setting
that is appropriate for everyone, you should
always use your Franklin with the volume
set at moderate levels and avoid prolonged
exposure to high volume levels.
•
Do not use abrasive cleaners to clean your
Franklin as that could cause scratches or
damage.
•
Do not bring your Franklin into contact with
any sharp objects as that could cause scrat-
ches or damage.
•
Do not insert anything into your Franklin
unless otherwise specified in the user
instructions. Inserting foreign objects into
your Franklin might cause damage to the
internal components.
•
Do not attempt to repair, modify, or disas-
semble your Franklin yourself, it does not
contain any user-serviceable components.
•
Do not attempt to replace your Franklin’s
battery, it is built-in and is not changeable.
•
Observe all signs and displays that require
an electrical device or RF radio product to
be switched off in designated areas.
•
Turn off your Franklin prior to boarding an
aircraft. Do not use your Franklin inside an
aircraft unless other bluetooth devices are
allowed on the flight.
•
Dispose of your Franklin and your Franklin’s
battery according to local regulations. Do
not dispose the battery with regular house-
hold waste.
8
Fire and electric shock hazard
Battery/charger hazard
Automobile accident hazard
Caution
Please read the safety information carefully to ensure your personal safety
and prevent property damage.
Specifications