General Information
48
Riding Mode Selection
Warning
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings. Do not loan your motorcycle
to anyone as they may change the
riding mode settings from the one you
are familiar with, causing loss of
motorcycle control and an accident.
Riding modes may be selected when the
motorcycle is stationary or moving.
When the MODE button is pressed the
riding modes are displayed in the
following sequence:
• ROAD Mode
• OFF ROAD Mode
• RIDER Mode.
To allow the user to scroll between each
of the modes there is a one second
time-out to allow for further scrolling to
take place.
The selected mode is automatically
activated once the one second time-out
has elapsed, and the conditions for
switching modes have been met.
Note:
•
The riding mode will default to
ROAD when the ignition is switched
ON if: The OFF ROAD Mode was
active the last time the ignition was
switched off; or The RIDER Mode
was active the last time the ignition
was switched off with ABS and/or
TTC set to Off Road or Off.
Note:
•
Otherwise, the last selected riding
mode will be remembered and
activated when the ignition is
switched ON.
Selecting a Riding Mode –
with the Motorcycle
Stationary
Note:
•
If the ignition is switched on and
the
engine
not
started,
the
instruments
will
display
the
odometer for five seconds. During
this time, no mode changes can be
made.
Press and release the MODE button on
the instrument housing until the desired
riding mode is flashing in the display.
2
3
1
1.
MODE button
2.
Selected riding mode (flashing)
3.
Current (active) riding mode
