Triumph Tiger 900 GT, Руководство пользователя

Страница: 100 / 204

How to Ride the Motorcycle
100
Stopping the Engine
PU
SH
OFF
O
N
1234
N
0
2
4
6
8
10
12
34
0
mi
DISTANCE
F E
21.5 C o
x100
AVG
S
M
TRIP 1
2
4
3
1 5 6
7 8
1. Engine stop switch
2. STOP position
3. RUN position
4. Starter button
5. OFF position
6. ON position
7. Ignition switch
8. Neutral indicator light
To stop the engine:
• Close the throttle completely.
• Select neutral.
• Turn the ignition switch OFF.
• Select first gear.
• Support the motorcycle on a firm,
level surface with the side stand.
• Lock the steering.
Caution
The engine should not be stopped
by turning the ignition switch to the
OFF position when the motorcycle is
moving. The engine stop switch is for
emergency use only.
Stopping the engine when the
motorcycle is moving may cause
damage to motorcycle components.
Starting the Engine
Warning
Never start the engine or run the
engine in a confined area.
Exhaust fumes are poisonous and can
cause loss of consciousness and death
within a short period of time.
Always operate the motorcycle in the
open air or in an area with adequate
ventilation.
Caution
Do not operate the starter
continuously for more than five
seconds as the starter motor will
overheat and the battery will become
discharged.
Wait 15 seconds between each
operation of the starter to allow for
cooling and recovery of battery power.
Do not let the engine idle for
long periods as this may lead to
overheating which will cause damage
to the engine.
Caution
The low oil pressure warning light
should go out shortly after the engine
starts.
If the low oil pressure warning light
stays on after starting the engine,
stop the engine immediately and
investigate the cause.