Triumph Tiger 850 Sport 2020, Руководство пользователя

Страница: 133 / 200

Maintenance
133
• If there is an incorrect amount of
free play, adjustments must be
made.
3
2 - 3 mm
1
2
1. Adjuster sleeve (lock nut fully loosened)
2. Correct clearance 0.08–0.12 in (2–3 mm)
3. Clutch lever
• If correct adjustment cannot be
made using the lever adjuster, use
the cable adjuster at the lower end
of the cable.
• Loosen the adjuster lock nut.
• Turn the outer cable adjuster to give
0.08–0.12 in (2–3 mm) of free play at
the clutch lever.
• Tighten the locknut to 31 lbf in
(3.5 Nm).
1 2 3
1. Clutch cable
2. Lock nut
3. Adjuster nut
Drive Chain
Warning
A loose or worn chain, or a chain that
breaks or jumps off the sprockets
could catch on the engine sprocket or
lock the rear wheel.
A chain that snags on the engine
sprocket will injure the rider and lead
to loss of motorcycle control and an
accident.
Similarly, locking the rear wheel will
lead to loss of motorcycle control and
an accident.
For safety and to prevent excessive
wear the drive chain must be checked,
adjusted and lubricated in accordance
with the scheduled maintenance
requirements. Checking, adjustment and
lubrication must be carried out more
frequently for extreme conditions such
as high speed riding, salty or heavily
gritted roads.
If the chain is badly worn or incorrectly
adjusted (either too loose or too tight)
the chain could jump off the sprockets
or break. Therefore, always replace
worn or damaged chains using genuine
Triumph parts supplied by an authorized
Triumph dealer.
Drive Chain Lubrication
Lubrication is necessary every 200 miles
(300 km) and also after riding in wet
weather, on wet roads, or any time that
the chain appears dry.