General Information
104
Passenger Seat Refit
1
2
2
cgif
1.
Passenger seat brackets
2.
Subframe loops
To refit the seat:
• Reconnect the heated seat’s elec-
trical connector (if equipped).
• Engage the seat's two brackets un-
der the loops on the subframe.
• Press down at the rear to engage
in the seat lock.
Rider's Seat
Warning
The rider's seat is only correctly
retained and supported once the
passenger seat is correctly fitted.
Never ride the motorcycle with the
pillion seat detached or removed, as
the front seat will not be secure and
may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1
1.
Rider's seat
To remove the rider's seat:
• Remove the passenger seat (see
103).
• Grasp the rider's seat on either
side, and slide it rearwards and up-
wards.
• If equipped with heated seats, dis-
connect the heated seat’s electrical
connector for complete removal
from the motorcycle.
