Instruments
47
Bike Set Up - Hill Hold Control
(if equipped)
Hill hold control assists in making hill
starts. The system (when activated) will
apply the rear brake to hold the
motorcycle in position. The system will
then automatically deactivate and
release the rear brake when it detects
that the motorcycle is attempting to
move off.
TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD
INDICATORS
EXIT
BIKE SETUP
ABS
HILL HOLD
DISABLED
ENABLED
TC
SERVICE
To enable/disable hill hold control:
• From the Bike Set Up menu, push
the joystick down to select HILL
HOLD and press the joystick center
to confirm.
• Push the joystick down to select
either ENABLED or DISABLED.
• Press the joystick center to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
For more information on hill hold
.
Bike Set Up - Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
EXIT
BIKE SETUP
INDICATORS
MANUAL
AUTO BASIC
AUTO ADVANCED
SERVICE
TC
ABS
INDICATORS
TSAS
TRIUMPH SHIFT ASSIST
HILL HOLD
Selecting a Turn Signals Mode
To select the required turn signals mode:
• From the Bike Set Up menu, push
the joystick down to select
INDICATORS and press the joystick
center to confirm.
• Push the joystick down/up to scroll
between AUTO BASIC, AUTO
ADVANCED and MANUAL.
–
Auto Basic
- The self-canceling
function is on. The turn signals
will activate for eight seconds
and an additional 213 ft. (65
meters).
–
Auto Advanced
- The self-
canceling function is on. A
quick short press activates the
turn signals for three flashes.
A longer press activates the
turn signals for eight seconds
and an additional 213 ft. (65
meters).
–
Manual
- The self-canceling
function is off. The turn signals
must be manually canceled
using the turn signal switch.
• Press the joystick center to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
