background image

Instruments

43

Display Set Up

This menu allows configuration of the 

display options. For more information, 

see page 

51

.

Reset to Defaults

This menu allows all instrument settings 

to be returned to the default setting. 

For more information, see page 

55

.

Riding Modes Menu

The Riding Modes menu allows 

configuration of the riding modes.

RIDING MODES
BIKE SETUP
TRIP SETUP
DISPLAY SETUP

EXIT

MAIN MENU

RESET TO DEFAULTS

To access the Riding Modes menu:
  •  Press the HOME button to display 

the Main menu.

  •  Push the joystick down and then 

press the joystick center to select 

RIDING MODES.

The following model specific options are 

available:
 • Rider
 • Rain
 • Road
 • Sport
 • Off-Road
 • Off-Road Pro
  •  Reset To Defaults.

Riding Modes

To change the riding modes settings:
  •  From the Riding Modes menu, push 

the joystick down/up to select a 

specific riding mode and press the 

joystick center to confirm.

RIDING MODES
BIKE SETUP
TRIP SETUP
DISPLAY SETUP

EXIT

MAIN MENU

RIDING MODES

RIDER

ROAD
SPORT

RESET TO DEFAULTS

RAIN

RESET ALL TO DEFAULTS

OFF-ROAD
OFF-ROAD PRO

  •  Push the joystick down/up until the 

required setting option is selected 

and press the joystick center to 

confirm.

EXIT

RIDING MODES

ROAD
SPORT

ABS
MAP
TC
RESET TO DEFAULTS

RIDER

RAIN

RIDER

OFF-ROAD PRO
RESET ALL TO DEFAULTS

OFF-ROAD

  •  Push the joystick down/up until the 

required option is selected and 

press the joystick center to confirm.

EXIT

ABS
MAP
TC

RIDER

ABS

ROAD

RESET TO DEFAULTS

OFF

OFF-ROAD

Содержание Tiger 1200 XR Series



































































































































































































































Отзывы: