Cleaning and Storage
209
Washing
Prepare a mixture of cold water and
mild automotive cleaner. Do not use a
highly alkaline soap as commonly found
at commercial car washes because it
leaves a residue.
Wash the motorcycle with a sponge or
soft cloth. Do not use abrasive scouring
pads or steel wool. They will damage the
finish.
Rinse the motorcycle thoroughly with
cold water.
After Washing
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil-free brake disc
cleaner.
Remove the plastic bags and tape, and
clear the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle
operation.
Use a dry cloth or chamois leather to
absorb water residue. Do not allow
water to stand on the motorcycle as
this will lead to corrosion.
Start the engine and run it for 5
minutes. Make sure that there is
adequate ventilation for the exhaust
fumes.
