Maintenance
205
Bulb Replacement
Caution
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
In addition, the use of bulbs of
incorrect wattage may cause the
chassis ECM to cut power to affected
lighting circuits.
Use genuine Triumph supplied bulbs as
specified in the Triumph Parts Catalog.
Always have replacement bulbs
installed by an authorized Triumph
dealer.
Headlights
All Models except Tiger 1200 XR
The headlight unit is a sealed,
maintenance-free LED unit.
Tiger 1200 XR Only
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulb to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty, clean
with alcohol before reuse.
The headlight unit does not need to be
removed to replace a bulb.
1
2
cgjn
3
1.
Bulb retainer (right hand shown)
2.
Bulb retainer hook
3. Bulb
To replace a bulb:
• Remove the rider's seat.
• Disconnect the battery, negative
(black) lead first.
• Remove the bulb cover from the
bulb to be replaced by rotating it
counterclockwise.
• Disconnect the multiplug from the
bulb.
• Detach the bulb retainer from the
hook on the headlight assembly
and rotate it away from the bulb as
shown.
• Remove the bulb from the bulb
retainer.
Installation is the reverse of the removal
procedure.
