Triumph Tiger 1200 XR Series, Руководство пользователя

Страница: 151 / 226

How to Ride the Motorcycle
151
Warning
If the optimized cornering ABS is not
functioning, the ABS warning light will
illuminate and the message ABS
SYSTEM - CORNERING ABS DISABLED
will be displayed in the multifunction
display.
In this situation, the ABS will continue
to operate but without the optimized
cornering function, provided that:
• There are no other ABS faults
• The ABS has not been disabled by the
rider (see Bike Setup on page 76 or
Riding Mode Configuration on page
85
).
Do not continue to ride for longer than
is necessary with the warning light
illuminated. In the event of a fault,
contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
In this situation, braking too hard
during cornering may result in loss of
motorcycle control and an accident.
ABS Warning Light
When the ignition switch is
turned to the ON position, it is normal
for the ABS warning light to flash on
and off.
If the ABS warning light is constantly
illuminated it indicates that the ABS
function is not available because:
• the ABS has been disabled by the
rider (see Bike Setup on page
76
or
Riding Mode Configuration on
page 85 ).
• the ABS has a malfunction that
requires investigation.
If the ABS warning light becomes
illuminated while riding, it indicates that
the ABS has a malfunction that requires
investigation. One of the following
warning messages may be displayed in
the multifunction display:
• WARNING - ABS SYSTEM DISABLED
• ABS SYSTEM - CORNERING ABS
DISABLED (models equipped with
optimized cornering ABS only).
For more information on the ABS
warning light, see page
61
.