General Information
123
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured, it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider's Seat
Warning
The rider’s seat is only correctly
retained and supported once the
passenger seat is correctly mounted.
Never ride the motorcycle with the
passenger seat detached or removed,
as the front seat will not be secured
and may move.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1
1.
Rider’s seat
To remove the rider’s seat:
• Remove the passenger seat (see
).
• Grasp the rider’s seat on either
side, and slide it rearwards and
upwards.
• If equipped with heated seats,
disconnect the heated seat’s
electrical connector for complete
removal from the motorcycle.
To re-install the seat:
• Reconnect the heated seat’s
electrical connector (if equipped).
• Engage the seat's front rail into the
bracket at the rear of the fuel tank
and lower the rear rail into the rear
brackets.
• Push down firmly on the rear of the
seat.
• Reinstall the passenger seat (see
).
Rider’s Seat Height Adjustment
Warning
Always adjust both seat height
adjusters.
Adjusting only one height adjuster may
prevent correct installation of the seat.
Riding the motorcycle with an
incorrectly mounted seat may cause
loss of motorcycle control and an
accident.
