Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 26 / 192

GENERAL INFORMATION
26
▼
Press the ON/OFF button on the
smart key to turn the key on. The
status symbol light shows green
briefly to indicate that the smart
key is on.
A short press on the ON/OFF button
shows the status of the smart key;
red is OFF and green is ON.
A long press of the ON/OFF button
will change the status to OFF or ON
after briefly showing the original
status colour first.
▼
If the smart key battery is flat, then
use the smart key in the passive key
operation method.
For more information on starting
the engine with keyless ignition, see
page 98.
Passive Key Operation
To turn the motorcycle on with the
passive key (or the smart key if the
battery is discharged):
▼
The system sensor is located
beneath the passenger seat. Access
the system sensor from the left
hand side of the motorcycle.
▼
Hold the key /-10 mm of the
system sensor.
1
1. System sensor
▼
The smart key must be held against
the system sensor while pressing
the Engine Start/Stop switch in
either the START or Power ON/OFF
position (see page 56).
Master Ignition Switch
(if fitted)
Master Ignition Switch
The master ignition switch is only fitted
to motorcycles in the United States and
Canada. The master ignition switch is
located on the right hand side of the
motorcycle.
To operate the motorcycle with the
keyless ignition, the master ignition
switch must be in the ON position.
If the master ignition switch is in the
OFF position then the keyless ignition
cannot be used and the motorcycle can
not be started.