Triumph Tiger 1200 GT 2021, Руководство пользователя, Страница: 134 / 192

MAINTENANCE
134
Final Drive Unit
The final drive unit oil level can be
checked and adjusted. Always check
the final drive unit for oil leaks in
accordance with the scheduled
maintenance chart.
Warning
If the rear bevel box is submerged in
water above the level of the breather
then this may lead to water in the rear
bevel box oil.
The rear bevel box oil needs to be
checked after any riding which may
have resulted in the rear bevel box
being submerged in water.
Take the motorcycle to an authorised
Triumph dealer to check and replace
the rear bevel box oil.
1
1. Rear bevel box breather
Final Drive Oil Level Adjustment
Warning
Under no circumstances should the
final drive unit be disassembled.
Failure to observe this warning could
lead to a malfunction of the final drive
unit causing lock-up of the rear wheel
leading to loss of motorcycle control
and an accident.
1
1. Filler level plug
To check and adjust the oil level in the
final drive unit:
▼
Remove the filler level plug.
▼
Fill the final drive unit with fully
synthetic 75W/90 hypoid oil that
meets specification API Service Level
GL5, such as Castrol SAF-XO fully
synthetic hypoid oil, until the level of
oil inside the final drive unit is level
with the bottom of the filler.
▼
Refit the filler level plug and tighten
to 25 Nm.