Triumph Thruxton TFC 2019, Руководство пользователя

Страница: 90 / 130

Maintenance and Adjustment
90
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS equipped brake system.
In this situation, braking too hard will
cause the wheels to lock resulting in
loss of control and an accident.
Reduce speed and do not continue to
ride for longer than is necessary with
the indicator light illuminated. Contact
an authorized Triumph dealer as soon
as possible to have the fault checked
and rectified.
Inspect the level of brake fluid in
both reservoirs and change the brake
fluid in accordance with scheduled
maintenance requirements. Use only
DOT 4 fluid as recommended in the
Specification section. The brake fluid
must also be changed if it becomes,
or is suspected of having become
contaminated with moisture or any
other contaminants.
Note
A special tool is required to bleed the
ABS braking system. Contact your
authorized Triumph dealer when the
brake fluid needs replacing or the
hydraulic system requires maintenance.
Front Brake Fluid Level Inspection
and Adjustment
Inspect and adjust the brake fluid level
as described below.
3
jajc_3
1
2
1. Reservoir cap retaining screws
2. MAX level line
3. MIN level line
The brake fluid level in the reservoir
must be kept between the MAX and MIN
level lines (reservoir held horizontal).
To adjust the brake fluid level:
• Loosen the reservoir cap retaining
screws and remove the reservoir
cap and the diaphragm seal.
• Fill the reservoir to the MAX level
line using new DOT 4 fluid from a
sealed container.
• Reinstall the reservoir cap making
sure that the diaphragm seal is
correctly positioned between the
reservoir cap and reservoir body.
• Tighten the reservoir cap retaining
screws to 6 lbf in (0.7 Nm).