Triumph Street Triple R, Руководство пользователя

Страница: 90 / 245

GENERAL INFORMATION
90
UnitS (Imperial, US or Metric)
Units has four selectable display modes.
Each display provides the following
information:
mpg (Imperial gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will
read in miles. The fuel consumption will
be measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in litres of fuel per 100
km.
km/L (Metric)
The speedometer and odometer will
read in kilometres. The fuel consumption
will be measured in kilometres per litre
of fuel.
Changing the Units Display
Warning
Do not attempt to change the units
display with the motorcycle in motion
as this may lead to loss of motorcycle
control and an accident.
3
1
2
1. Scroll button
2. SET button
3. Display screen
To access the units display:
▼
Press and release the SCROLL button
until SEtUP is shown in the display
screen then press the SET button.
▼ Press and release the SCROLL button
until UnitS is shown then press the
SET button.
▼
Press and release the SCROLL button
until the required display is shown.
The display will scroll through in the
following order when pressing down
on the SCROLL button (it will scroll
through in the reverse order when
pressing up on the SCROLL button):
– mpg – Imperial gallons
– mpg US – US gallons
– L/100 km – Metric
– km/L – Metric.