Triumph Street Triple R, Руководство пользователя

Страница: 56 / 245

GENERAL INFORMATION
56
Bike Set Up - TSA (Shift Assist) (if
fitted)
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
changes and down-changes of gear.
The clutch must be used for stopping
and pulling away.
TSA will not operate if the clutch is
applied or if an up-change is attempted
by mistake when in 6th gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear change.
ENABLED
DISABLED
TSA (SHIFT ASSIST)
EXIT SELECT BACK
To enable/disable TSA:
▼
From the Bike Set Up menu, push the
joystick down to select TSA (SHIFT
ASSIST) and press the joystick to
confirm.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
▼ Press the joystick centre to confirm
the required selection.
▼ The display will then return to the
Bike Set Up menu.
For more information on Triumph Shift
Assist (TSA), see page
125.
Bike Set Up - Direction Indicators
The direction indicators can be set to
Auto Basic, Auto Advanced or Manual
mode.
AUTO BASIC
AUTO ADVANCED
MANUAL
INDICATORS
EXIT SELECT BACK
Selecting a Direction Indicators Mode
To select the required direction
indicators mode:
▼ From the Bike Set Up menu, push the
joystick down to select INDICATORS
and press the joystick centre to
confirm.
▼ Push the joystick down/up to scroll
between
AUTO BASIC, AUTO
ADVANCED and MANUAL.
– Auto Basic - The self-cancelling
function is on. The direction
indicators will activate for eight
seconds and an additional 65
metres.
– Auto Advanced - The self-
cancelling function is on. A short
press activates the direction
indicators for three flashes. A
longer
press activates the
direction indicators for eight
seconds and an additional 65
metres.
– Manual - The self-cancelling
function is off. The direction
indicators must be manually
cancelled using the direction
indicator switch.