Triumph Street Triple R 2022, Руководство пользователя

Страница: 90 / 237

GENERAL INFORMATION
90
Lap Timer (if equipped)
2
1
1. Display screen
2. Button A
The lap timer provides the following
information: lap time, number of laps,
average speed, maximum speed and
distance traveled. Each display provides
the following information:
Lap Time
The elapsed time of the lap (the lap
number will be displayed in the
speedometer display). Information is
recorded for each lap since the last
reset. The lap timer will reset to zero
after 100 minutes.
Number of Laps
The number of recorded laps since the
last reset is displayed. A maximum of 50
laps can be stored by the lap timer.
Maximum Speed
The maximum speed achieved per lap
and the lap number.
Average Speed
The average speed per lap and the lap
number.
Distance Traveled
The distance traveled per lap and the
lap number.
Accessing the Lap Timer
Warning
Do not attempt to switch between lap
timer
display modes with the
motorcycle in motion as this may lead
to loss of motorcycle control and an
accident.
To switch the lap timer on or off:
▼
Make sure the motorcycle is
stationary and in neutral, turn the
ignition to the ON position.
▼ Press and release button A until SEt
UP is shown in the display screen.
▼ Press button B.
▼ Press and release button A until Lap
is shown then press button B. ON or
OFF will flash in the display screen.
▼ Press button A to select the required
display then press button B. Do not
touch buttons A or B until Lap is
shown in the display.
▼ Press and release button A until
rEturn is shown then press button B.
Trip 1 is then shown in the display
screen.
The lap timer has two modes; data
recording mode and data retrieval mode.