Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 54

Страница: 54 / 184

General Information

• Push the joystick down/up to select

the required Indicator option. Press

the joystick centre to confirm.

Indicator Settings Options

Manual

The self-cancelling function

is off.
The direction indicators

must be manually cancelled

using the direction

indicator switch.

Self Cancel

The self-cancelling function

is on.
A short press on the

direction indicator switch

activates the direction

indicators for three flashes.
A longer press on the

direction indicator switch

activates the direction

indicators for eight

seconds and an additional

65 metres.

For more information on direction

indicators, see page 61.

Settings - Factory Reset

The Factory Reset option allows the

Settings options to be reset to the

default setting.

Journey Menu

The Journey menu allows configuration

of the motorcycle journey information.

To access the Journey menu:
• From the Main menu, push the

joystick down and select the Journey

option.

• Press the joystick centre to confirm.
• Select the required option from

the list to access the relevant

information.

Journey - Trip Meter

There are two trip meters that can be

accessed and reset in the information

tray.

To view a specific trip meter:
• Push the joystick left or right to

select 1 or 2 from the tabs.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 54 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: