Triumph Speed Triple 1200 RS, Руководство пользователя

Страница: 53 / 184

General Information
53
Settings - Traction Control
The Traction Control (TC) system can
be temporarily disabled. The Traction
Control system cannot be permanently
disabled, it will be automatically enabled
when the ignition is turned off and then
on again.
To enable/disable the traction control:
• From the Settings menu, push the
joystick down/up to select the
Traction Control option.
• Push the joystick right to move the
slider dot to the right to enable
traction control.
• Push the joystick left to move
the slider dot to the left to disable
traction control.
For more information on traction
control, see page 68.
Settings - Triumph Shift Assist
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
changes and down-changes of gear.
The clutch must be used for stopping
and pulling away.
Triumph Shift Assist will not operate if
the clutch is applied or if an up-change
is attempted by mistake when in 6th
gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear change.
To enable/disable Triumph Shift Assist:
• From the Settings menu, push the
joystick down/up to select the
Triumph Shift Assist option.
• Push the joystick right to move the
slider dot to the right to enable
Triumph Shift Assist.
• Push the joystick left to move
the slider dot to the left to disable
Triumph Shift Assist.
For more information on Triumph Shift
Assist, see page 87.
Settings - Indicators
The direction indicators setting can be
changed.
To change the direction indicators
setting:
• From the Settings menu, push the
joystick down/up to select the
Indicators option.
• Press the joystick centre to confirm.