Triumph Rocket 3 TFC 2020, Руководство пользователя

Страница: 81 / 178

General Information
81
Fill the fuel tank slowly to help prevent
spillage. Do not fill the tank to a level
above the bottom of the filler neck.
This will make sure there is enough air
space to allow for fuel expansion if the
fuel inside the tank expands through
absorption of heat from the engine or
from direct sunlight.
2
1
1. Fuel filler neck
2. Maximum fuel level
After refuelling always check that the
fuel filler cap is correctly closed.
Side Panels
The right hand side panel can be
removed to gain access to the tool kit
and to adjust the rear rebound damping
suspension.
2
3
4
1
1. Spigots
2. Grommets
3. Side panel locating tang
4. Side panel locating slot
To remove the side panel:
• Grasp the panel firmly in both hands
and gently pull the top edge of the
panel away from the motorcycle
until the upper spigots are away
from the retaining grommets
(leaving the grommets in place).
• Slide the side panel upwards and lift
the side panel away from the side
panel locating tang.
To refit side panel:
• Slide the side panel downwards
while placing the side panel locating
tang into the side panel locating
slot.
• Position the upper spigots to the
grommets.
• Press firmly to secure the panel.
• Grasp the panel and make sure that
it is fully retained.