Maintenance
151
Daytime Running Light (DRL)
(if fitted)
The Daytime Running Light (DRL) is
situated within the headlight assembly
and is a sealed, maintenance-free
LED unit. The headlight unit must be
replaced in the event of the failure of
the DRL.
Headlight Adjustment
The headlight unit can only be adjusted
vertically. There is no horizontal
adjustment.
The vertical beams of the left and right
hand headlights can only be adjusted
together. Independent adjustment is
not possible.
The headlight unit is equipped with
easily accessible adjuster bolts to allow
the vertical adjustment to be corrected
when the motorcycle is fully loaded.
1
1. Headlight bracket bolts
To adjust the vertical headlight beam:
• Switch the ignition on. The engine
does not need to be running.
• Switch the headlight dipped beam
on.
• Loosen the headlight bracket bolts
securing the headlight unit to the
headlight bracket sufficiently to
allow restricted movement of the
headlights.
1
2
1. Front subframe alignment mark
2. Headlight bracket mark
• Move the headlight unit downwards
or upwards to adjust the headlight
beam accordingly.
• To return the headlight alignment to
the factory standard position, move
the headlight unit until the front
subframe alignment mark and the
headlight bracket mark are aligned.
• Tighten the headlight bracket bolts
to 15 Nm.
• Recheck the headlight beam
settings.
• Switch the headlights off when
the headlight beam settings are
satisfactory.
Содержание Rocket 3 TFC 2020
