Triumph Daytona Moto2 765 2020, Руководство пользователя

Страница: 124 / 163

Maintenance
124
Warning
Do not install tube type tyres on
tubeless rims.
The bead will not seat and the tyres
could slip on the rims, causing rapid
tyre deflation that may result in a loss
of motorcycle control and an accident.
Never install an inner tube inside a
tubeless tyre without the appropriate
marking. This will cause friction inside
the tyre and the resulting heat build-
up may cause the tube to burst
resulting in rapid tyre deflation, loss of
motorcycle control and an accident.
Typical Tyre Marking - Tubeless Tyre
chrt
Typical Wheel Marking - Tubeless Tyre
Tyre Inflation Pressures
Warning
Incorrect tyre inflation will cause
abnormal tread wear and instability
problems that may lead to loss of
control and an accident.
Under inflation may result in the tyre
slipping on, or coming off the rim.
Overinflation will cause instability and
accelerated tread wear.
Both conditions are dangerous as they
may cause loss of control leading to
an accident.
Warning
Tyre pressures which have been
reduced for off-road riding will impair
on-road stability.
Always make sure that the tyre
pressures are set as described in the
Specification section for on-road use.
Operation of the motorcycle with
incorrect tyre pressures may cause
loss of motorcycle control and an
accident.
Correct inflation pressure will provide
maximum stability, rider comfort and
tyre life. Always check tyre pressures
before riding when the tyres are cold.
Check tyre pressures daily and adjust if
necessary. See the Specification section
for details of the correct inflation
pressures.