General information
55
Helmet Hook
Note:
•
Not equipped on Thruxton and
Thruxton R.
A helmet can be secured to the
motorcycle using the helmet hook
located on the left hand side of the
motorcycle, beneath the seat.
To attach a helmet to the motorcycle,
remove the seat (see page
56) and loop
the helmet chin strap over the hook.
Make sure the flat area above the hook
is not obstructed by the helmet strap,
as this will prevent the seat engaging
correctly.
To secure the helmet, re-install the seat
and lock into position.
Caution
Do not allow helmet(s) to rest against a
hot muffler. The helmet may be
damaged.
Warning
Never ride the motorcycle with
helmet(s) secured to the helmet hook
as this may cause the motorcycle to
become unstable leading to loss of
control and an accident.
Seats
Seat Care
Caution
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
to the seat covers.
Thruxton and Thruxton R
cjal
Seat Stand
To prevent damage to the seat after
removing, release the metal stand from
the underside of the seat.
