GENERAL INFORMATION
54
Tire Pressures
Warning
The Tire Pressure Monitoring System
(TPMS) is not to be used as a tire
pressure gage when adjusting the tire
pressures.
For correct tire pressures, always
check the tire pressures when the
tires are cold using an accurate tire
pressure gage.
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.
The tire pressures shown on your
instrument panel indicate the actual
tire pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and the inflation pressure to
increase. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tire pressures when the
tires are cold using an accurate tire
pressure gage (see page 132). Do not
use the tire pressure display on the
instruments.
Replacement Tires
When replacing tyres, always have an
authorized Triumph dealer fit your tyres
and make sure they are aware that
tyre pressure sensors are fitted to the
wheels.
Ignition Switch/Steering Lock
Warning
For reasons of security and safety,
always turn the ignition to the OFF or
PARK (if equipped) position and remove
the key when leaving the motorcycle
unattended.
Any unauthorized use of the
motorcycle may cause injury to
the user, other road users and
pedestrians and may also cause
damage to the motorcycle.
Содержание Bonneville T100
