Triumph Bonneville T100 2018, Руководство пользователя

Страница: 38 / 186

General Information
38
Traction Control (TC) Indicator Light
The TC indicator light is used
to indicate that the traction
control system is active and is
working to limit rear wheel slip
during periods of hard acceleration or
under wet or slippery road conditions.
Warning
If the traction control is not
functioning, care must be taken when
accelerating and cornering on wet/
slippery road surfaces to avoid rear
wheel spin. Do not continue to ride
for longer than is necessary with
the Engine Management System
Malfunction Indicator Light (MIL)
and traction control warning lights
illuminated. Contact an authorized
Triumph dealer as soon as possible to
have the fault checked.
Hard acceleration and cornering in this
situation may cause the rear wheel
to spin resulting in loss of motorcycle
control and an accident.
TC Indicator Light Operation:
TC Switched On:
• Under normal riding conditions the
indicator light will remain off.
• The indicator light will flash rapidly
when the traction control system
is working to limit rear wheel slip
during periods of hard acceleration
or under wet or slippery road
conditions.
TC Switched Off:
The indicator light will not illuminate.
Instead the TC disabled warning light
will be illuminated (see page 38).
Note
Traction control will not function if there
is a malfunction with the ABS system.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
Traction Control (TC) Disabled
Warning Light
The TC disabled warning light
should not illuminate unless
traction control is switched
off or there is a malfunction.
If the warning light becomes illuminated
at any other time while riding, it
indicates that the traction control
system has a malfunction that requires
investigation.
Turn Signals
When the turn signal switch is
turned to the left or right, the
indicator warning light will
flash on and off at the same
speed as the turn signals.
High Beam
When the ignition is switched
ON and the high beam is
selected, the high beam
warning light will illuminate.