Triumph Bonneville Bobber, Руководство пользователя

Страница: 52 / 142

General Information
52
Side Stand
Warning
The motorcycle is fitted with an
interlock system to prevent it from
being ridden with the side stand in the
down position.
Never attempt to ride with the side
stand down or interfere with the
interlock mechanism as this will cause
a dangerous riding condition leading
to loss of motorcycle control and an
accident.
cjwk
1
1. Side stand
The motorcycle is equipped with a side
stand on which it can be parked.
When using the side stand, always turn
the handlebars fully to the left and
leave the motorcycle in first gear.
Whenever the side stand is used, before
riding, always make sure that the stand
is fully up after first sitting on the
motorcycle.
For instructions on safe parking, refer
to the 'How to Ride the Motorcycle'
section.
Side Panels
The left hand side panel can be
removed to gain access to the fuse box,
adjustment tool and inspection cap tool.
cjxe
3
4
2
1
1. Locating tangs
2. Side panel locating slots
3. Spigot
4. Grommet
To remove either side panel:
• Grasp the panel firmly in both hands
and pull the lower edge of the panel
away from the motorcycle until the
spigot clears the retaining grommet
(leaving the grommet in place).
• Slide the side panel rearwards
and lift the side panel clear of the
locating tangs.
To refit either side panel:
• Slide the side panel forwards whilst
place the locating tangs into the
side panel locating slots.
• Position the spigot to the grommet.
• Press firmly to secure the panel.
• Grasp the panel and make sure that
it is fully retained.