Triumph Bonneville Bobber, Руководство пользователя

Страница: 33 / 142

General Information
33
Trip Meter
Warning
Do not attempt to switch between
the odometer and trip meter display
modes or reset the trip meter with the
motorcycle in motion as this may lead
to loss of motorcycle control and an
accident.
1
1. Trip meter display (Trip 1 selected)
There are two trip meters. Either trip
meter shows the distance that the
motorcycle has travelled since the
meter on display was last reset to zero.
To switch between trip meters, press
and release the SCROLL button, located
on the left hand handlebar switch
housing, until the required trip meter is
shown.
Trip Meter Reset
To reset either of the trip meters, select
and display the trip meter to be zeroed.
Then press and hold the SCROLL button
for one second. After more than one
second, the trip meter on display will
reset to zero.
Clock
To access the clock, press and release
the SCROLL button, located on the left
hand handlebar switch housing, until
the clock is shown.
1
1. Clock
Clock Adjustment
Warning
Do not attempt to adjust the clock
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
To reset the clock:
• Select the clock display.
• Press and hold the SCROLL button
for one second, the clock’s hour
display will start to flash. Release
the SCROLL button.
To reset the hour display:
• Make sure the hour display is still
flashing then press and release
the SCROLL button to change the
setting. Each individual button press
will change the setting by one digit.