General Information
28
To switch between trip meters, press
and release the SCROLL button, located
on the left hand handlebar switch
housing, until the desired trip meter is
shown.
1
i
1.
SCROLL button
Trip Meter Reset
To reset either of the trip meters, select
and display the trip meter to be zeroed.
Then press and hold the SCROLL button
for one second. After more than one
second, the trip meter on display will
reset to zero.
Clock
To access the clock, press and release
the SCROLL button, located on the left
hand handlebar switch housing, until
the clock is shown.
1
1. Clock
Clock Adjustment
Warning
Do not attempt to adjust the clock with
the motorcycle in motion as this may
lead to loss of motorcycle control and
an accident.
To reset the clock, select the clock
display. Then press and hold the
SCROLL button for one second, the
clock’s hour display will start to flash;
release the SCROLL button.
To reset the hour display, make sure the
hour display is still flashing then press
and release the SCROLL button to
change the setting. Each individual
button press will change the setting by
one digit.
