Triumph Adler DF 470, Руководство по обслуживанию

Страница: 52 / 66

5JS
2-2-2
(2) Switches and sensors
Figure 2-2-2 Switches and sensors
1. Paper conveying sensor (PCS)............. Detects a paper misfeed in the processing section.
2. Adjustment sensor 1 (ADS1) ................ Detects the front adjustment plate in the home position.
3. Adjustment sensor 2 (ADS2) ................ Detects the rear adjustment plate in the home position.
4. Eject paper sensor (EPS) ..................... Detects a paper in the eject section.
5. Belt sensor (BLS).................................. Detects the position of the bundle discharge belt.
6. Roller sensor (RLS) .............................. Detects the position of the bundle discharge unit.
7. Paper surface sensor 1 (PSS1) ............ Detects the position of the push paper lever.
8. Paper surface sensor 2 (PSS2) ............ Detects the position of the push paper lever.
9. Tray upper limit sensor (TULS) ............. Detects the eject tray reaching the upper limit.
10. Tray lower limit sensor (TLLS) .............. Detects the eject tray reaching the lower limit.
11. Slide sensor (SLS) ................................ Detects the slide position of the staple unit.
12. Staple cover switch (STCSW)............... Detects opening/closing of the staple cover.
13. Staple position sensor (SPS) ................ Detects the position of the staple unit in the processing section.
14. DF Top Cover sensor (DFTCS) ............ Detects opening/closing of the df top cover.
1
14
12
7
13
11
9
10
8
5
6
4 2
3
Machine front
Machine inside
Machine rear