manualshive.com logo in svg

Triumph Adler CLP 4516, Инструкция по эксплуатации


Поделиться
Скачать
background image

 

iv

Agfa Monotype License Agreement

1) "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special 

format as well as the UFST Software.

2) You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and 

versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or 
personal purposes at the address stated on the registration card you return to Agfa Japan. Under the terms of this 
License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the 
fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from 
Agfa Japan. Agfa Japan retains all rights, title and interest to the Software and Typefaces and no rights are granted 
to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3) To protect proprietary rights of Agfa Japan, you agree to maintain the Software and other proprietary information 

concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use 
of the Software and Typefaces.

4) You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You 

agree that any such copy shall contain the same proprietary notices as those appearing on the original.

5) This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License 

may be terminated by Agfa Japan if you fail to comply with the terms of this License and such failure is not 
remedied within thirty (30) days after notice from Agfa Japan. When this License expires or is terminated, you 
shall either return to Agfa Japan or destroy all copies of the Software and Typefaces and documentation as 
requested.

6) You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7) Agfa Japan warrants that for ninety (90) days after delivery, the Software will perform in accordance with Agfa 

Japan-published specifications, and the diskette will be free from defects in material and workmanship. Agfa 
Japan does not warrant that the Software is free from all bugs, errors and omissions.
THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE 
EXCLUDED.

8) Your exclusive remedy and the sole liability of Agfa Japan in connection with the Software and Typefaces is repair 

or replacement of defective parts, upon their return to Agfa Japan.
IN NO EVENT WILL AGFA JAPAN BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MIS-
APPLICATION OF THE SOFTWARE AND TYPEFACES.

9) New York, U.S.A. law governs this Agreement.
10) You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written 

consent of Agfa Japan.

11) Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical 

Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as 
appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software 
as set forth in FAR 52.227-19 (c)(2).

12) YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE 

TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY 
STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS 
AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRE-
SENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT 
THE TERMS AND CONDITIONS OF THIS AGREEMENT.

Содержание CLP 4516



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CLP 4516

Unisys 115 Operation/Reference Manual preview
115
Бренд: Unisys Страницы: 255
Xerox B210 User Manual preview
B210
Бренд: Xerox Страницы: 199
Oki B2200 Maintenance Manual preview
B2200
Бренд: Oki Страницы: 100
Oki B2200 Quick Setup Manual preview
B2200
Бренд: Oki Страницы: 2
Xerox B235 User Manual preview
B235
Бренд: Xerox Страницы: 316
Xerox B215 Get Started preview
B215
Бренд: Xerox Страницы: 74
Xerox B215 User Manual preview
B215
Бренд: Xerox Страницы: 306
Xerox B215 Quick Use Manual preview
B215
Бренд: Xerox Страницы: 16
Xerox B210 Quick Start Manual preview
B210
Бренд: Xerox Страницы: 4
Oki B2200 Guide Utilisateur preview
B2200
Бренд: Oki Страницы: 38
Oki B2200 Guía Del Usuario preview
B2200
Бренд: Oki Страницы: 38
Oki B2200 User Manual preview
B2200
Бренд: Oki Страницы: 36
Oki B2200 Safety & Warranty preview
B2200
Бренд: Oki Страницы: 36
Xerox Legacy 4127 Customer Release Notes preview
Legacy 4127
Бренд: Xerox Страницы: 8
Oce im4530 Scanning Manual preview
im4530
Бренд: Oce Страницы: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Бренд: Oce Страницы: 116
Oki PACEMARK 4410 Service Handbook preview
PACEMARK 4410
Бренд: Oki Страницы: 189
Zebra GX420t Instruction Manual preview
GX420t
Бренд: Zebra Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды