manualshive.com logo in svg

Triumph Adler CLP 4516, Инструкция по эксплуатации


Поделиться
Скачать
background image

iii

IBM PROGRAM LICENSE AGREEMENT

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PRO-
GRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS 
DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING 
LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS 
LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE 
DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN 
YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS.
The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the 
Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under 
this license.
The term "Programs" means the original and all whole or partial copies of it, including modified copies or portions 
merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights 
in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession 
of the Programs and the device to another party.
If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. 
Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.
You may not:
1) use, copy, modify, merge, or transfer copies of the Program except as provided in this license;
2) reverse assemble or reverse compile the Program; or
3) sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided "AS IS."
THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

3. Limitation of Remedies

IBM's entire liability under this license is the following;
1) For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will 

be for actual damages only and will be limited to the greater of:

a) the equivalent of U.S. $25,000 in your local currency; or
b) IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM 
is legally liable.
IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential 
damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be 
liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any 
developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such 
developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, 
so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and 
conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for 
payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, 
regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, 
this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is 
governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which 
you acquired the Program.

Typeface Trademark Acknowledgement

All resident fonts in this printer are licensed from Agfa Corporation.
Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Book-
man, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.

Содержание CLP 4516



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CLP 4516

Xerox D125 User Manual preview
D125
Бренд: Xerox Страницы: 310
TallyGenicom 2440 Quick Start Manual preview
2440
Бренд: TallyGenicom Страницы: 38
Sagem MF9500 Facsimile Operation Manual preview
MF9500
Бренд: Sagem Страницы: 83
Inno3D 3D Printer S1 User Manual preview
3D Printer S1
Бренд: Inno3D Страницы: 23
Olympus CAMEDIA P-200 Installation Manual preview
CAMEDIA P-200
Бренд: Olympus Страницы: 28
Muratec MFX-3550 User Manual preview
MFX-3550
Бренд: Muratec Страницы: 213
ICT GP83 Service Manual preview
GP83
Бренд: ICT Страницы: 34
Xerox DocuPrint C2535 A User Manual preview
DocuPrint C2535 A
Бренд: Xerox Страницы: 120
Xerox Phaser 6700V/DX User Manual preview
Phaser 6700V/DX
Бренд: Xerox Страницы: 162
Oce OP14 Operation Manual preview
OP14
Бренд: Oce Страницы: 66
Xerox WorkCentre 5687 Series Service Manual preview
WorkCentre 5687 Series
Бренд: Xerox Страницы: 2320
Xerox VersaaLink B600 User Manual preview
VersaaLink B600
Бренд: Xerox Страницы: 170
Canon TS6420 Online Manual preview
TS6420
Бренд: Canon Страницы: 342
Canon TS7450 Online Manual preview
TS7450
Бренд: Canon Страницы: 454
Canon TS9150 Online Manual preview
TS9150
Бренд: Canon Страницы: 498
Canon TR7660 Online Manual preview
TR7660
Бренд: Canon Страницы: 563
Canon TR7620 Getting Started preview
TR7620
Бренд: Canon Страницы: 20
Lexmark CX310 series Specifications preview
CX310 series
Бренд: Lexmark Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды