Triumph Adler CLP 4516, Инструкция по эксплуатации, Страница: 122 / 218

3.10 Paper Handling
3-75
Entering the Width and Length
Then, use the following procedure to set the paper size.
Enter the paper size for
X Dimension
and
Y Dimension
as shown in the figure.
Figure 3-14
1
When the unit of measurement is set, press the V key.
>>X Dimension
appears as shown below (the paper width setting).
2
Press the
ENTER
key. A blinking cursor ( _ ) appears.
3
Press the U or V key to increase or decrease the value of the figure where the cursor
is blinking and display the desired width. The width can be set between
148
and
216
mm (
5.83
to
8.5
inches). You can use the Y or Z key to move the cursor
right and left.
4
Display the paper width and press the ENTER key.
5
When the width is set, press the key.
>>Y Dimension
appears (the paper length
setting). Set the desired length in the same way as the width. The length can be set
between
210
and
356
mm (
8.27
to
14.02
inches).
6
Display the paper length, press the
ENTER
key.
7
Press the
MENU
key. The display returns to Ready .
8
To print using the custom size set above, define the same custom size on the printer
driver. For details, see
KX Printer Drivers Operation Guide .
X Dimension
Y
Dim
ens
ion
148 to 216 mm
(5.83 to 8.5 inches)
21
0 t
o
356
mm
(8
.27 t
o
14.
0
2
inches
)
>>X Dimension
216 mm
>>X Dimension
216 mm