Triumph Adler CLP 4516 Скачать руководство пользователя страница 110

Страница: 110 / 218

3.9 Operating the Storage Device

3-63

Press the

key repeatedly until

>Delete Data

appears. The data name

also appears (

Report

, in this example).

Press the

ENTER

key. A blinking question mark (

) appears before the data name.

Press the

key to display the desired data name.

Press the

ENTER

key.

Processing

appears and the data is deleted from the

memory card. The display returns to

Ready

Formatting a Memory Card

A new memory card must be formatted before it can be used in the printer. Formatting
allows data to be written to the memory card.

To format a memory card, proceed as follows. When a new memory card is inserted in the
printer's slot,

Format error Memory card

will appear on the message display.

Press the

MENU

key.

Press the

key repeatedly until

Memory Card >

appears.

Press the

key.

Press the

key repeatedly until

>Format

appears.

Press the

ENTER

key. A question mark (

) appears.

•

Formatting will destroy any existing data on a storage device including
a used memory card.

•

Formatting of the memory card must be executed from the printer.

>Delete Data
Report

>Delete Data
?Report

Note

Memory Card >

>Format

>Format ?

Содержание CLP 4516



























































































































































































































Результаты поиска

Содержание CLP 4516

Отзывы:

Triumph Adler CLP 4516, Инструкция по эксплуатации, Страница: 110 / 218

Результаты поиска

Содержание CLP 4516

Отзывы: