Triumph Adler CLP 4516, Инструкция по эксплуатации

Страница: 108 / 218

3.9 Operating the Storage Device
3-61
Writing Data
Data can be written to a memory card until no space is left for storing. When writing to a
memory card, a name is assigned to the file automatically. You can use the procedure
explained in the section
Printing a List of Data Names (Partitions) on page 3-64 to print a
list of data names for confirmation.
To write data to a memory card, proceed as follows.
1
Press the
MENU
key.
2
Press the U or V key repeatedly until
Memory Card >
appears.
3
Press the Z key.
4
Press the
U
or
V
key repeatedly until
>Write Data
appears.
5
Press the ENTER key. A question mark (
?
) appears.
6
Press the ENTER key.
Processing
appears, then
Waiting
.
7
In this state, send the file from the computer to the printer.
As the printer receives data, the message display changes to
Processing
, then
when the end of the data is received, the message display changes to
Waiting
.
8
Check that the message display has changed to Waiting, then press the GO key. This
writes the file to the memory card and instructs the printer to automatically print out
a memory card write information page as shown below.
First check that the memory card is properly formatted. Otherwise, the
>Write Data
message to be explained below will not be shown on the
message display. If the memory card inserted in the memory card slot is not
formatted, the
>Format
will automatically appear on the message display.
Format the memory card. See Formatting a Memory Card on page 3-63 .
Note
Memory Card >
>Write Data
>Write Data ?